Alcatel 060170-10, Руководство пользователя

Страница: 258 / 430

VoIP Commands
Page 5-116
Command Usage
Specify Foreign Exchange Office Loop Start (FXO LS) incoming ring signal debounce interval.
Syntax Options
Remarks
The
voice signaling protocol
command must be set to the corresponding protocol type before
any commands for E&M (Wink Start, Immediate Start, and Delay Start Signaling), and FXS/
FXO (Loop and Ground Start) commands will take effect.
A minimum debounce value of
500
must be set for analog voice switching (VSA) daughter-
cards.
voice signaling fxs ls ringing debounce
voice signaling channel <
slot/port/startChannel-endChannel
> fxo ls ringing debounce <
value
>
Definitions:
slot
Specifies chassis slot number where VSM is installed, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
1
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
value Specifies the fxo ls incoming ring signal debounce (delay interval) in milliseconds from 1
to 1,000, (e.g.,
50
).
♦
Syntax Note
♦
Do not
use commas when entering the fxo ls incoming ring
signal debounce value (for example,
1,000
will return a syntax
error message).
Default:
The default value is
50
milliseconds.
Command Examples:
voice signaling channel 2/1/1-12 fxo ls ringing debounce 50
voice signaling channel 2/2/13-24 fxo ls ringing debounce 500
voice signaling channel 2/3/1-30 fxo ls ringing debounce 1000