
VoIP Commands
Page 5-19
Command Usage
Activate previously configured voice switching daughtercard parameters.
Syntax Options
Remarks
This command is required and must be included in the master
vsmboot.asc
file as per Chap-
ter 5, “Setup and Installation.”
This command activates all previously configured voice switching daughtercard parameters by
transferring cached parameters to the daughtercard, and then placing the parameters into
service from the card.
Using this command immediately puts all channels on the voice switching daughtercard out
of service, shuts down the card, and automatically erases the previous configuration; this
includes disconnecting any calls in progress, and ignoring any incoming traffic from either the
phone or data networks.
Once the activation command is issued, the configuration should be saved to the flash direc-
tory on the switch via the global
dump
command. The
dump
command should only be used
after
a configured voice switching daughtercard has been activated, otherwise an invalid
configuration might be saved instead which could prevent the switch from booting properly
the next time. For more details on using this command, see Chapter 4, “Setup and Installa-
tion.”
The
dump
command can be use to create a text file in the flash directory of the switch. To
view the contents of the generated text file, use the
view file
command. For more information,
refer to the
dump
and
view file
command descriptions in the
Command Line Reference Guide.
voice daughter card activate
voice daughter card <
slot/card
> activate
Definitions:
slot
Specifies slot number of switching module installed in chassis, (e.g.,
2
).
card_number
Specifies the voice daughtercard position number, (e.g.,
1
).
♦
Syntax Note
♦
This command is always required, and must only be issued after
all other relevant VoIP CLI commands have been configured. See
Chapter 5, “Setup and Installation,” for details regarding its use in
the
vsmboot.asc
file.
If using this command on the CLI, all channels should be placed
out of service via the
voice channel state
command. (
Not avail-
able this release.
)
It is recommended that this command be used only during “off
hours,” or after connected devices are first instructed to stop rout-
ing calls to the card.
Default:
None
Command Examples:
voice daughter card 2/1 activate
voice daughter card 2/2 activate
Содержание 060170-10
