Alcatel 060170-10, Руководство пользователя

Страница: 201 / 430

VoIP Commands
Page 5-59
Command Usage
Specify voice channel mode—telephony, passthrough or PLAR (Private Line Automatic Ring-
down) used to complete calls on designated channels. Establishes semi-fixed bandwidth
connections between points in the network.
Syntax Options
Remarks
In the telephony mode , digits come from voice path or signaling. Upon in-seize, the voice
switching daughtercard collects inbound digits, then uses the Numbering Plan to complete
calls to the specified hunted destination.
In the
passthrough mode
, no digit processing is performed by the DSPs on the voice switch-
ing daughtercard, and no routing is performed. Upon in-seize, the channel is immediately
connected to another channel, via Numbering Plan processing.
In the PLAR mode , no inbound digit processing takes place. Upon in-seize, the PLAR tele-
phone number is immediately routed based upon the dialing plan. The telephone number
must be configured to automatically dial using the dial plan.
voice channel mode
voice channel <
slot/port/startChannel-endChannel
> mode {telephony | pass through | plar}
Definitions:
slot
Specifies slot number of voice daughtercard installed in switching module, (e.g.,
2
).
port Specifies physical port number on voice daughtercard, (e.g.,
2
).
startChannel
The first number in the range of voice channels (e.g.,
1
).
endChannel The last number in the range of voice channels (e.g.,
30
).
♦
Syntax Note
♦
Be sure to separate the start and end range numbers with a
hyphen (e.g.,
1-30
).
telephony
Allows use of Numbering Plan to complete calls to specified hunted destination.
pass through
Allows two DS-0 channels to be cross-connected to complete calls (
not available this
release )
plar
Allows calls to be routed based upon telephone number configured to dialing plan.
Default:
The default setting is
telephony
.
Command Examples:
voice channel 2/2/1-12 mode telephony
voice channel 2/2/13-24 mode pass through
voice channel 2/2/1-12 mode plar