Alamo Industrial A-Boom, Руководство оператора

Страница: 99 / 164

OPERATION
A-BOOM 03/09 Operation Section 3-3
©2009 Alamo Group Inc.
OPERA
TION
1.STANDARD EQUIPMENT AND SPECIFICATIONS
ROTARY GRASS MOWER
Width of Cut: 60"
Blade Bar: Single leaf, 5”x7/8”
Blade: 14"x3"x 1/2", free-swinging
Hyd. Motor Rating: Gear type, 74 HP
(at
2500 PSI
Deck Thickness: 14-gauge
Side Skirts: 1/4" thick
Frame: 3/8" bar. cross-braced
Skid Shoes: Full-length, replaceable
Debris Deflector: 3-ply rubber belting, front & rear
FLAIL-AXE
®
Width of Cut: 48"
Cutter Shaft: 4-1/2" dia. steel tube, 3/8" wall,
greased bearings
Knives: 16 ea., 2 pound, 360 deg. swing,
reversible
Hyd. Motor Rating: Gear Type, 76 HP (a) 3000 PSI @ 2400 RPM
Deck Thickness:10-gauge
End Plates: 3/8"
Deck Frame: 4" square cross-tube
Skid Shoes: Full-length, replaceable
Rear Roller: 5-1/2" dia. tube, adj. 3/4" to 6"
Debris Deflector: Full-width rubber-covered fabric, rear.
Removable full-width steel, front.
BUZZBAR
®
TREE LIMB CUTTER
Cutting Width: 7-1/2"
Blades: Four blades, each 26" in diameter
and 3/16" thick
Cuts up to 4" diameter tree limbs
Hydraulic Motor: 38 HP
Main Channel: Formed of 3/16" sheet steel
End Plates: 3/8"
Roller Bearings: Tapered with factory set pre-load
Rear Shield: 10-gauge steel formed for stiffness
TIMBER CAT
®
SICKLE BAR
Cuts up to 4" tree limbs
Width of Cut: 5' or 7'
Blade Bar: 5/8" thick
Blade: T -l steel
Direct coupled operating hydraulic cylinder
{excludes pitman).
The Mower is designed for certain mowing applications and is rated to cut up to a specific
size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this
mower to cut vegetation above the Mower’s rated capacity or to cut any type of non-
vegetative material. Only operate this Mower on a properly sized and equipped Tractor.
Operating this Mower in an application for which it is not designed and/or operating the
Mower with the wrong size Tractor can cause Mower component damage and equipment
failure resulting in possible serious injury or death.
(SGM-14)
HEAVY DUTY GRASS FLAIL
Width of Cut: 48" or 60"
Cuttershaft: 4-1/2" bala nced tube, greased
bearings
Knives: 36 pair of 3 o/. knives are standard
Hyd. Motor Rating: Gear Type 76 HP @ 30 00 PS I @
2400 RPM
Deck Thickness: 10- gauge
End Plates: 1/4" thick
Deck Frame: 2-7/8" tube, full-width front & rear
Skid Shoes: Full-length, replaceable
Rear Roller: 6" tube greaseable bearings
Debris Deflector: Full-width, rubber -covered fabric,
rear
BOOM-AXE*
Widths of Cut: 60" std., 50" opt.
Blade Bar: 60"-3 leaf 5"x 7/8"(up to 6 blades.)
50"-3/4" x 29" disc.(up to 6 blades.)
Blades: 60"-5"xl4"x5/8"replaceable.
Hyd. Motor Rating: Gear Type 101 HP @
2750 PSI @ 2400 RPM
Deck Thickness: 10 gauge
Side Skirts: 3/8"
Frame: Cross-braced. 3/8" bar
Skid Shoes: Replaceable, full-length
Debris Deflector: Front, spring-loaded, retractable shield.
Rear, 3-ply rubber belting.
OPTION
50" cutting head. Avo-leaf blade bar with two blades.
DITCHER
Cutting Width: 22" rotor
Blade Carrier: 1/2" disc with gusset backing
Blade: 9" x 5-1/2" reversible
Hyd. Motor Rating: Gear Type 172 HP
(a;
2500 PSI
Bonnet (deck): 3/8"
Frame: 6" x 1 0" tube
Wear Plates: 2-1/2" x4"x 3/8" replaceable, 3 ca.
Debris Deflector: Adj. 90 deg. down to horizontal
OPTION
Reverse head to deposit spoil on tractor side of ditch.
SICKLE BAR MOWER
Width of Cut: 5'
Cutterbar: Knives: 6" tapered x 5/8"
Knives: 20 ea. 3" triangular sections
Hyd. Motor Rating: 35 HP
@
700 RPM
Rock Guards: 19 ea. with replaceable
Skid Shoes: ledger plates 1 4". replaceable
Knife Speed Control: Hyd. Governor
Drive Connection: Pitman lcss