Alamo Industrial A-Boom, Руководство оператора

Страница: 140 / 164

OPERATION
A-BOOM 03/09 Operation Section 3-44
©2009 Alamo Group Inc.
OPERA
T
ION
Before transporting tractor between locations, idle
the tractor engine, disengage the attached head,
and wait for all head motion to come to a complete
stop. Place the boo m in its storage cradle rest
support and then turn the joystick master switch to
the OFF position.
• Placing Boom Articulating Arm on Boom Arm
Rest
• Extend the dipper section approximately half
way out.
• Bring the Lift to its full height and carefully
swing the boom back until it is just positioned
over the Boom Rest. NOTE: There is a formed
“V” plate on the dipper section that fits onto the
boom arm rest.
• Lower the Lift until this “V” rest on the Boom
Rest (this may take come re-adjustment of the
dipper section).
• Place the Master Switch in to the OFF position.
The boom is no w in the transport position. To
remove the boom from the Boom Rest, pull the Lift
back and raise the boom about 6 inches. Then
Swing the boom around to the desired position.
OPS-B- 0013_B
ON-OFF Switch
Before transporting the tractor on a public roadway
or boarding a trailer for transport, the tractor brake
pedals should be locked together. Locking the
pedals ensures th at b oth whe els b rake
simultaneously while stopping, especially when
making an emergency stop.
Use extreme caution and avoid hard applications of
the tractor brakes when towing heavy loads at road
speeds. Never tow the im plement at speeds
greater than 20 MPH (25 kph).
OPS-U- 0018