Alamo Industrial A-Boom, Руководство оператора

Страница: 21 / 164

SAFETY
A-BOOM 03/09 Safety Section 1-15
© 2009 Alamo Group Inc.
SAFETY
Secure the boom and mower head in the transport position before traveling on public roads.
Never transport on p ublic roads with the boom and mower head extended. Always d isen-
gage and lock out the hydraulic controls for the boom mower before transporting. Inadver-
tent boom movement on public roads may contact with other vehicles resulting in se rious
bodily injuries or even death.
(SBM-21)
Be particularly careful in transport. The Mower has raised the center of
gravity for the tractor and has increased the possibility of ov erturn.
Turn curves or go up slopes only at low speed and using a gradual turning angle. Slow
down on rough or uneven surfaces.
(SBM-3)
When transporting Boom Mower on a truck or trailer, the height or width
may exceed legal limits when the boom is in the transport position. Con-
tact with side or overhead structures or power lines can cause property
damage or se rious inju ry or dea th. If nece ssary lower boo m to re duce
height and/or remove mowing head to reduce width to the legal limits.
(SBM-
8)
Never operate the Tractor and Mower Unit without an OPS (Operators
Protective Structure) or Cab to prevent injury from objects thrown from
ground or from overhead trimming. S top mowing if wor kers or pass-
ersby are with in 100 yards.
(SBM-9)
The Joystick Master Control Switch must be OFF to prevent accidental movement of the
boom and cutting head whenever the mower is not being operated.
(SBM-16)
Make certain tha t the “Slow M oving Vehicle” (SMV) sign is inst alled in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local traf-
fic regulations.
(SG-6
)