Alamo Industrial A-Boom, Руководство оператора

Страница: 155 / 164

MAINTENANCE
ABOOM 03/09 Maintenance Section 4-11
©2009 Alamo Group Inc.
MAINTENANCE
Buzzbar Head
BLADES
For best performance, have blades set and sharpened when they begin to dull. Blades can be touched up with
a grinder or file between sharpenings.
To extend the life of the blade, remove resin accumulations. When the resin builds up, the blades will "burn" in
the cut, causing the blades to overhea t and warp. When cutting some types of trees, blades will need to be
cleaned every few hours. To remove the resin, use oven cleaner or lacquer thinner with a Scotch-Brite pad or
steel wool. Apply these product s carefully since many of them will remove p aint from your BuzzBar. Always
follow manufacturer's instructions for safe use.
Blades should turn clockwise when views from the top.
See illustration below for hose routing.
LUBRICATION
Grease each spindle with one pump of high quality lithium grease weekly. More than one pump is unnecessary
and will cause extra grease to spill from the relief.
Grease fittings are located in front of the machine, just above the blades.