AL-KO F100940008, Руководство пользователя

Страница: 30 / 136

en
Manual retraction in case of malfunction
30 Translation of the original operating instructions
4. Always turn the drive at the manual retraction
point anticlockwise at least 20 mm away from
the tyre.
5. Look for a service workshop to take the cara-
van for it to be repaired.
CAUTION!
Remove the fuse or disconnect the
battery!
The caravan is not allowed to move
whilst the drive is being retracted. Secure
the caravan!
MAMMUT SIGNAL OPTION
You can optionally activate the sounding of a si-
gnal on the remote control. The mammut signal is
deactivated when the system is delivered.
ADVICE
The remote control must be switched off
and the system must be inactive.
Switching on
1. Simultaneously press buttons e and f on the
remote control.
2. Keeping the buttons pressed, switch on the
remote control at the ON/OFF switch (b).
➯
First an LED self-test is carried out, then
calibration mode is activated. The opera-
ting state LED flashes red. You can now
release both buttons.
3. To activate the mammut signal, press buttons
e and g.
4. Then switch off the remote control at the ON/
OFF switch (b).
➯
The mammut signal sounds immediately
after switching on the remote control,
once the LED test is completed.
Switching off
1. Press keys (e and f) simultaneously on the re-
mote control.
2. Switch the remote control on at the on/off
switch (b) whilst holding the keys pressed.
➯
An LED self-test is performed first, then
calibration mode is activated. The opera-
ting status LED flashes red. You can re-
lease both keys.
3. To deactivate the Mammut sound, press the
keys (d and f).
MAINTENANCE AND CARE
DANGER!
Danger due to unintentional motion!
Never lie or lean under an unsecured ve-
hicle!
Before commencing any maintenance or
preventive maintenance work, move the
drives off the wheels (apply the hand-
brake of the caravan). Keep the radio
remote control away from unauthorized
persons.
We recommend having the Mammut checked
during the annual inspection of the caravan,
either by your dealer or directly by our Cust-
omer Service.
The drives must not be used as a jacking
point.
Always remove the fuse or disconnect the
supply battery when working on the drives.
Check the drive rollers, housing and cables
regularly for damage.
If you discover any visible defects, please
contact your nearest AL-KO Service Centre.
Before each season, check that all add-ons
are fastened securely.
Before every journey, and after a tyre change,
check that the distance between the drives
and the tyres is at least 20 mm.
If necessary, clean the drive rollers and hou-
sing with water or a brush (not a high-pres-
sure cleaner).
Remove all foreign objects from the drives.
Service the supply battery in accordance with
the specifications of the battery manufacture.
Disconnect the supply battery if the device is
not used for a prolonged period.
Recharge the supply battery regularly.
Ensure that the polarity is correct when con-
necting the supply battery.
WARRANTY
We will resolve any material or manufacturing faults during the legal warranty period in accordance with
our choice of either repair or replacement. The legal warranty period is determined by the legislation of
the country in which the machine was purchased.