AKO AKO-21006, Руководство пользователя

Страница: 38 / 120

HIGH LOW MAAU
38
HIGH LOW MAAU
The status of the inputs is shown in the area on the left of
the Display.
Safety circuits for the fans (or inverter)
General high pressure switch
General low pressure switch
MANUAL/AUTOMATIC selector
Safety circuit for the compressors
The open contact icon
c
means that there is a voltage of 0 V in the corresponding terminal. On
the other hand, if the icon shows a closed contact
b
, this means that there is a voltage of +24 V in the terminal.
The area to the right of the Display enables the output
terminals to be controlled:
Fans (or inverter)
Alarm Output
Compressors
Partial loadings
Move the cursor using the UP, DOWN, RIGHT and LEFT keys to select the element in the installation you wish
to control. The SET key allows you to:
Apply a voltage of +24 V to the control terminal for a compressor, partial loading or fan.
In this case, the corresponding icon will appear indicating that the output is active.
Apply a voltage of 0 V to the control terminal for a compressor, partial loading or fan.
SCREEN W-I/O
In the case that YES is selected, the display screen will be similar to that below:
we make it easy