AJA BRIDGE LIVE Скачать руководство пользователя страница 80

Страница: 80 / 139

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 80 www.aja.com

Output Stream Video Configuration Options

Video Codec

When selecting which codec to use, one aspect to consider is the type of

equipment being used by the receivers. If their equipment does not support the

higher demands of the codec, that could present challenges, especially if the

receivers would be required to purchase new equipment in order to be able to

receive the signal.
Choose from settings for the chosen video codec that define quality vs. speed

difference.

NDI

NDI is a flexible and versatile solution, allowing multiple video streams on a

shared connection. NDI supports high quality, low latency, frame-accurate video

over standard Ethernet networks. NDI stands for Network Device Interface and is

developed by NewTek.

HLS

BRIDGE LIVE supports output stream type HLS (HTTP Live Streaming), an adaptive

bit rate streaming protocol. HLS supports both AVC TS segments with H.264 and

Fragmented MP4 with both H.264 and H.265. HLS supports audio formats EAC3,

AC3 and AAC.
SDI sources or IP video stream sources can be input to BRIDGE LIVE, and then

encoded for output via HLS.
Based on TCP, HLS is used to deliver content to end point devices such as phones

and tablets or applications such as web browsers. For browsers all that is needed

is the URL with the playlist extension. Safari has this support natively; Chrome and

Firefox have extensions available for HLS playback.

NOTE: HLS is not useful for contribution, backhaul or any other workflow that requires

low latency.

The best way to deliver HLS with BRIDGE LIVE is to provide the pre-packed

video to a CDN. This means many end-point-devices can utilize the content

simultaneously.

JPEG 2000

JPEG 2000 is an image coding system that uses state-of-the-art compression

techniques based on wavelet technology and offers an extremely high level

of scalability and accessibility. Content can be coded once at any quality, up to

lossless, but accessed and decoded at a potentially very large number of other

qualities and resolutions and/or by region of interest, with no significant penalty

in coding efficiency.
Two methods used to transport JPEG 2000 are VSF TR-01:2103 and VSF TR-01:2018.

H.262 Encoding Options

H.262 is the official name for MPEG-2. Since it is the oldest of the codecs and it has

been around for a long time, many people are familiar with it and know how to

work with it. It is known to be reliable.

• Profile: High, Main, Simple

• The Simple profile allows you to use only I and P frames, while Main or High

profiles support even B frames. All H.262 profiles are 4:2:0. The High profile

also supports Spatial and SNR scalability modes. For bit rates and profiles,

Содержание BRIDGE LIVE












































































































































Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды

AJA BRIDGE LIVE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды