AJA BRIDGE LIVE Скачать руководство пользователя страница 18

Страница: 18 / 139

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 18 www.aja.com

Yellow -

Standby mode. For example, this can occur when a Pipeline is in SRT

mode and the stream does not have a subscriber. In that case, the stream is

not being sunk. However, when a subscriber is actively receiving the stream,

the signal will turn green. Another example of Standby mode is when a video

may be buffering while using HLS.

Green -

The stream is working correctly (and in the case of SRT, is being

subscribed to).

Stream Licenses

If a license is granted, the status shows “Unlimited time” or the time for which

the stream is allowed to produce an output, according to loaded license files (see

"Licensing" on page 102

). The status will be, for example:

• License: Unlimited time – a stream may produce an output for an unlimited

period of time

• License: Till 2021-02-21 23:59:59 – a stream will produce an output until the

displayed time point is passed.

NOTE: For your convenience, the status shows the time and date according to your

computer's time setting, not the BRIDGE LIVE system time, which may be

different.

For example, during installation, the automatic installer sets the time-zone to

America/Los Angeles, but you may be located in a different time zone. Also, you

might have offices in different time-zones and would prefer the servers to have

the same system time, potentially for monitoring purposes.

If the stream is not allowed to produce an output, the license status reads

“Blocked” or “Unavailable” and is shown red. BRIDGE LIVE will process the stream

as usual, the only difference is that the output will not be sent to defined output

sinks. This feature will help you verify your environment abilities, such as system

load limits, input stream compliance, and other factors, even if you don’t have

enough licenses yet. For that reason, the input and output stream status indicator

may be green even if the license status is not valid.
Possible invalid license statuses are:

• License: Blocked – there are licenses for the stream loaded in the system,

but the count of streams exceed the licensed number (other streams have

exhausted the available licenses)

• License: Unavailable – the stream needs a license which is not loaded (the

stream contains a feature of newer version of BRIDGE LIVE which isn’t included

in any loaded license)

Upper Left Quadrant – Interfaces

The first quadrant (upper left) refers to the I/O interfaces, whether that be SDI I/O

or 10GbE I/O.
Interfaces drop-down selections:

• For SDI I/O, select AJA Corvid 44 12G BNC - 0

When we switch to the SDI I/O we can see any channels which have a live

signal, and the format of that incoming signal. See

Figure 9

below.

• For streams I/O, select either:

Содержание BRIDGE LIVE












































































































































Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды

AJA BRIDGE LIVE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды