AJA BRIDGE LIVE Скачать руководство пользователя страница 121

Страница: 121 / 139

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 121 www.aja.com

• Network configuration (for example, do devices see each other on the

network?)

Bear in mind that providing an extensive and detailed description of your issue

will help us work more efficiently and deliver the solution faster.

A list of possible error messages in UI:

{stream} is not producing any data to sink – no video output is produced,
rather, the stream is filled with NULL packets

This message is normal during the stream initialization. Otherwise, there may

be a problem.

Some video frames are being dropped

A frame that cannot be processed by the pipeline due to flawed images, high

latency, etc., in a specified time slot, is dropped.

{stream} wasn’t detected in source stream

The provided stream parameters (width, height, frame rate or standard

compliance) during configuration in the UI do not match the auto-detected

parameters from the input Transport stream.

Video is being encoded at a lower frame rate {xxx} than required {yyy}

The video encoder is busy encoding too many streams. Try reducing the

number of encoding streams.

Video is being decoded at lower frame rate {xxx} than required {yyy}

The video decoder is busy decoding too many frames. Try reducing the

number of input streams.

{stream} is in unexpected state: {status}

Contact Support.

{stream} is not receiving any PCR from source

BRIDGE LIVE cannot detect any input data or all PCR packets are dropped.

Содержание BRIDGE LIVE












































































































































Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды

AJA BRIDGE LIVE, Инструкция по установке и эксплуатации

Результаты поиска

Содержание BRIDGE LIVE

Отзывы:

Бренды по названию

Популярные бренды