manualshive.com logo in svg

AJA BRIDGE LIVE, Инструкция по установке и эксплуатации

Поделиться
Скачать
AJA BRIDGE LIVE Скачать руководство пользователя страница 10

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 10 www.aja.com

 

•  A single UltraHD channel can be transported with 1x 12G-SDI cable using one 

of the SDI connectors. 

•  Four simultaneous HD channels (1080 60p) can be delivered with 4x 3G-SDI 

connectors. 

In this use case, one BRIDGE LIVE device would be installed at the production 

facility and a second BRIDGE LIVE device would be installed at the remote 

location. 

Simultaneous Bi-Directional Encoding and Decoding

NOTE:  BRIDGE LIVE supports simultaneous bi-directional encoding and decoding with 

HD/SD, but not with UltraHD. 

Receive up to three remote HD sources at a broadcast facility using the public 

Internet and return one program feed to a remote location. 
The broadcast facility receives the three incoming encoded stream sources from 

the remote location and decodes them into SDI for editing and production, while 

simultaneously returning to the remote location an encoded program feed. 
The remote facility in turn receives and decodes the returned program feed for 

program monitoring over SDI, while continuing to encode and transmit three HD 

sources to the broadcast facility. 
In this use case, one BRIDGE LIVE device would be installed at the broadcast 

facility and a second BRIDGE LIVE device would be installed at the remote 

location. 

Live Production Encoding

Encode SDI video for live production output, where video is delivered as the 

intended or intermediate format, such as H.264/H.265, 4:2:0. If a backup is 

needed, store locally with NAS or local HDD. 
For example, Telcos, IPTV, Cable operators receive an SDI signal from a source 

and they need simple MPEG-TS encoded with H.264/H.265 without ABR ladders. 

The output could be sent for further processing, or streamed to their IPTV/Cable 

network directly. 

Encoding for Content Distribution

Encode processed and produced video channel for primary distribution to 

partners (B2B) or for OTT (over the top) streaming. For example, you can run an 

H.264 or HEVC hand-off with ABR (adaptive bit rate) ladder profiles encoding, 

which can include pointing the ladder profile directly to a local packager or CDN. 

Metadata

BRIDGE LIVE allows the pass through of metadata, and supports the following 

metadata types: 

•  Ad insertion markers (SCTE-35/SCTE-104) pass through 
•  CC/Subtitles embedding into H.264 SEI messages 
•  Closed Captions (EIA-608/708) conversion 
•  Line 21 captions
•  MPEG-2 ancillary packet support, SMPTE 2038
•  Electronic program guide (EPG) on input

Содержание BRIDGE LIVE












































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды