AirLive WFP-151U, Руководство пользователя

Страница: 46 / 127

5. Server Configuration
41
AirLive WFP-151U User’s Manual
5.7 System Configuration
Double Click “System” icon and the System configuration window will pop-up.
In the System configuration page, you can see all available printing protocols and upgrade
the new firmware for this MFP Server.
Upgrade : You can use this “Upgrade” function to update the newest firmware of the MFP
Server. Click “ ” button and select the correct firmware in your PC. After selecting the
firmware file, click the “Upgrade” button to finish the firmware update process.
Tip: Before you upgrade the firmware, please make sure that the IP Address settings of the
MFP Server are in the same network as your computer.
Load Default : If you want to reset the MFP Server to default factory settings, please click
“Load Default”.
Wireless Function : You can select “Auto”, Enable” or “Disable” to manually configure the
wireless function.
Auto – “Auto” is the default setting of the MFP Server. At this mode, the MFP Server will
automatically decide to enable or disable the wireless function. When the MFP Server
starts up, it will auto-detect if the LAN port is connected to an active network by an Ethernet
cable. If this is the case, the MFP Server will run in Ethernet mode. If the MFP Server is not
connected to an active network by Ethernet cable, the MFP Server will run in wireless LAN
mode.
Users can plug the Ethernet cable to the MFP Server at the first, after configuring the MFP
Server features and wireless settings; they can unplug the Ethernet cable to enable the