AirLive IGR-842PoE, Руководство пользователя

Страница: 57 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
52
8. Trap Community :
Indicates the community access string when sending SNMP trap packet. The
allowed string length is 0 to 255, and the allowed content is ASCII characters from
33 to 126.
9. Trap Destination Address :
Indicates the SNMP trap destination address. It allow a valid IP address in dotted
decimal notation ('x.y.z.w').
And it also allow a valid hostname. A valid hostname is a string drawn from the
alphabet (A-Za-z), digits (0-9), dot (.), dash (-). Spaces are not allowed, the first
character must be an alpha character, and the first and last characters must not
be a dot or a dash
10. Trap Destination IPv6 Address :
Indicates the SNMP trap destination IPv6 address. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal digits with a colon
separating each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is
a special syntax that can be used as a shorthand way of representing multiple
16-bit groups of contiguous zeros; but it can appear only once. It can also
represent a legally valid
IPv4 address. For example, '192.1.2.34'.
11. Trap Authentication Failure :
Indicates that the SNMP entity is permitted to generate authentication failure
traps.
Possible modes are:
Enabled : Enable SNMP trap authentication failure.
Disabled : Disable SNMP trap authentication failure.
12. Trap Link-up and Link-down :
Indicates the SNMP trap link-up and link-down mode operation.
Possible modes are:
Enabled : Enable SNMP trap link-up and link-down mode operation.
Disabled : Disable SNMP trap link-up and link-down mode operation.
13. Trap Inform Mode :
Indicates the SNMP trap inform mode operation. Possible modes are:
Enabled : Enable SNMP trap inform mode operation.
Disabled : Disable SNMP trap inform mode operation.
14. Trap Inform Timeout(seconds) :
Indicates the SNMP trap inform timeout. The allowed range is 0 to 2147 .
15. Trap Inform Retry Time :
Indicates the SNMP trap inform retry times. The allowed range is 0 to 255 .