AirLive IGR-842PoE, Руководство пользователя

Страница: 262 / 299

5. Web Management: Monitor of IGR-842POE
257
AirLive IGR-842POE User Manual
5.11.2. LLDP-MED Neighbors
This page provides a status overview of all LLDP-MED neighbors. The displayed table
contains a row for each port on which an LLDP neighbor is detected. This function applies
to VoIP devices which support LLDP-MED.
Web interface
To configure LLDP in the web interface:
1. Click Monitor, LLDP, LLDP-MED neighbors.
2. If you want to auto-refresh the information then you need to evoke the
“Auto-refresh”.
3. Click “Refresh“ to refresh the LLDP-MED neighbors.
Parameter description:
1. Port:
The port on which the LLDP frame was received.
2. Device Type:
LLDP-MED Devices are comprised of two primary Device Types: Network
Connectivity Devices and Endpoint Devices.
LLDP-MED Network Connectivity Device Definition
LLDP-MED Network Connectivity Devices, as defined in TIA-1057, provide access
to the IEEE 802 based LAN infrastructure for LLDP-MED Endpoint Devices. An
LLDPMED Network Connectivity Device is a LAN access device based on any of
the following technologies:
1. LAN Switch/Router
2. IEEE 802.1 Bridge
3. IEEE 802.3 Repeater (included for historical reasons)
4. IEEE 802.11 Wireless Access Point
5. Any device that supports the IEEE 802.1AB and MED extensions defined by
TIA1057 and can relay IEEE 802 frames via any method.
LLDP-MED Endpoint Device Definition
LLDP-MED Endpoint Devices, as defined in TIA-1057, are located at the IEEE
802 LAN network edge, and participate in IP communication service using the
LLDPMED framework.
Within the LLDP-MED Endpoint Device category, the LLDP-MED scheme is
broken into further Endpoint Device Classes, as defined in the following.