AirLive IGR-842PoE, Руководство пользователя

Страница: 170 / 299

5. Web Management: Monitor of IGR-842POE
165
AirLive IGR-842POE User Manual
Protocol to Group mapping table and must not be preused by any other existing
mapping entry on this page.
3. VLAN ID :
Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges
from 1-4095.
4. Port Member :
A row of check boxes for each port is displayed for each Group Name to VLAN ID
mapping. To include a port in a mapping, check the box. To remove or exclude the
port from the mapping, make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
5. Adding a New Group to VLAN mapping entry :
Click “Add New Entry” to add a new entry in mapping table. An empty row is
added to the table, the Group Name, VLAN ID and port members can be
configured as needed. Legal values for a VLAN ID are 1 through 4095. The
“Delete” button can be used to undo the addition of new entry.
Button :
Auto-Refresh –Check this box to refresh the page automatically. Automatic
refresh occurs every 3 seconds.
Refresh – Click to refresh the page immediately.
Add New Entry – Click to add a new entry in mapping table. Legal values for a
VLAN ID are 1 through 4095 .
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
Delete – The button can be used to undo the addition of new entry. The maximum
possible Group to VLAN mappings are limited to 64.
4.17.3. IP Subnet-based VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding,
updating and deleting IP subnet-based VLAN entries and assigning the entries to different
ports. This page shows only static entries.
Web Interface
To Display IP subnet-based VLAN Membership to configured in the web interface:
1. Click VCL, Group Name VLAN configuration and add new entry.
2. Specify the VCE ID, IP Address, Mask Length, VLAN ID and select Port
Members..
3. Click Save.