AirLive IGR-842PoE, Руководство пользователя

Страница: 105 / 299

5. Web Management: Monitor of IGR-842POE
AirLive IGR-842POE User Manual
100
Parameter description:
1. Delete :
Check to delete the entry. It will be deleted during the next save.
2. Port :
Specify ARP Inspection is enabled on which VLANs. First, you have to enable the
port setting on Port mode
3. VLAN ID :
The vlan id for the settings.
4. MAC Address :
Allowed Source MAC address in ARP request packets.
5. IP Address :
Allowed Source IP address in ARP request packets.
Buttons :
Add New Entry – Click to add a new entry to the Static ARP Inspection table.
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
4.5.2.5.4. Dynamic Table
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default being 20,
selected through the "entries per page" input field. When first visited, the web page will
show the first 20 entries from the beginning of the Dynamic ARP Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields allow
the user to select the starting point in the Dynamic ARP Inspection Table. Clicking the
button will update the displayed table starting from that or the closest next Dynamic ARP
Inspection Table match. In addition, the two input fields will - upon a button click - assume
the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text "No more entries" is shown in the displayed table. Use the
button to start over.
Web Interface
To configuration a Dynamic ARP Inspection Table Configuration in the web interface:
1. Click Security, Network, ARP Inspection.
2. Checked “Auto-refresh”.
3. Click “Refresh” to refresh the port detailed statics..
4. Specify the Start from port, VLAN ID, MAC Address, IP Address, and entries
per page..