AirLive IGR-842PoE, Руководство пользователя

Страница: 196 / 299

5. Web Management: Monitor of IGR-842POE
191
AirLive IGR-842POE User Manual
Button :
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.
Cancel – Return to the previous page without saving the configuration change.
4.19.11.
Storm Control
The section allows user to configure the Storm control for the switch. There is a unicast
storm rate control, multicast storm rate control, and a broadcast storm rate control. These
only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the
MAC Address table. The configuration indicates the permitted packet rate for unicast,
multicast or broadcast traffic across the switch.
Web Interface
To configure the Storm Control Configuration parameters in the web interface:
1. Click Configuration, QoS, Storm Control Configuration
2.
Evoke to select the frame type to enable storm control
3. Scroll to set the Rate Parameters
4. Click the save to save the setting
5.
If you want to cancel the setting then you need to click the Reset button.
It will revert to previously saved values
Parameter description:
1. Frame Type :
The settings in a particular row apply to the frame type listed here: Unicast,
Multicast or Broadcast.
2. Enable :
Enable or disable the storm control status for the given frame type.
3. Rate :
The rate unit is packets per second (pps). Valid values are: 1 , 2 , 4 , 8 , 16 , 32 , 64 ,
128 , 256 , 512 , 1K , 2K , 4K , 8K , 16K , 32K , 64K , 128K , 256K , 512K or 1024K .
Button :
Save – Click to save changes.
Reset – Click to undo any changes made locally and revert to previously saved
values.