General
Safety
Procedures
•
Improper installation, operation, or maintenance may contribute to conditions in the work area
or facility that could result in personal injury and product or property damage. Check that all
equipment is properly selected and sized for the intended use.
•
Consult and comply with national and local codes relating to fire or explosion and all other
appropriate codes when determining the location and operation of this equipment.
•
Safe and efficient operation of the unit depends on proper installation.
•
Authorities with jurisdiction should be consulted before installing any electrical equipment to
verify local codes and installation procedures. In the absence of such codes, install unit
according to the National Electric Code, NFPA No. 70-latest edition.
•
A qualified installation and service agent must complete installation and service of this
equipment.
•
DO NOT weld on any pressure vessel or modify them in any way.
•
DO NOT remove, modify, or adjust protective or safety devices.
•
Any electrical power supply needs to be disconnected before performing maintenance or service
work, follow any lock out/tag out procedures.
•
Isolate and depressurize dryer system before performing maintenance or service work, follow any
lock out/tag out procedures.
•
DO NOT operate the equipment with the control panel door open.
•
Always pressurize or depressurize the system or component slowly.
•
Eye protection safety glasses are recommended for personnel protection when the system is in
operation and/or pressurized to protect from possible flying debris expelled from the purge
exhaust mufflers during tower depressurization or during any depressurization through any vents,
drains etc. and any other possible flying debris.
•
Hearing protection is recommended for personnel protection when the system is in operation
and/or pressurized to protect from any load burst of pressurized air to atmosphere… such as
through the depressurization and purge exhaust
•
For optimum performance, use only Aircel replacement parts.
