Air-Vac PCBRM100, Руководство пользователя

Страница: 98 / 209

PCBRM100 User’s Guide Chapter 4: Software Overview
4101.00.902 4-60
Teach Screen Button Descriptions and Options
1 – Insert New Event: Adds events in the profile.
2 – Home System Motor: Homes all axes on the platform
3 – Activate Manual/Teach Camera Alignment: Brings up the vision camera and activates X & Y
joysticks to move camera Y axis and X axis
4 –
Toggle Laser Distance Switch: Activates the laser for automated nozzle alignments. This is used
with the setup of the Z Hot Gas Nozzle Change task.
5 – Delete Current Event: Allows the deletion of an event.
6 – New & Copy: Works with the Insert New Event button to either insert a blank/new event or make
a duplicate copy of an event.
7 –
Time: Allows programmer to set the time in seconds for individual events.
8 – Events: Displays which event is currently shown and allows programmer to scroll up and down to
view the events.
9 –
Foot/Time: Selects whether an event is time or footswitch based.
10 – Application Notes/Miscellaneous Control: Brings up the notes page. This page contains all
board, nozzle, part and flow well information set up from the programmer.
11 –
Stop: Halts all functions of platform (heat and motion).
12 – Motor Motion: This group allows the movement of the axes listed. Clicking on the blue Motor
Axis bar brings up a motor panel.
13 – OK/Exit Screen: Exits Teach screen and temporarily saves any changes made.
14 – Msg: This is the message bar. Programmers can type any message in this space and it will display
in the Run screen during that event.
15 – Show All, Show Masters, Show Any Selected: This button has three options used to display
the tasks:
a – Show All: Displays all tasks whether checked, unchecked or a solid box.
b – Show Masters: Shows only tasks that were designated masters (solid box), by the
programmer. All others are hidden.
c –
Show Any Selected: Shows only tasks that have a check or solid box. All others are hid-
den.
16 – Task Options: This section of the screen displays all the tasks. What appears in this section is
determined by the Show button state.
17 – Task Properties: This section shows all controls associated with a task. The properties change
depending on which task is selected under Task Options .
18 – Support Options: This section appears when more information is needed by a check box in Task
Properties . For example:
a – Image List Control is selected under Task Options .
b – Show 1st Image is checked in Task Properties .
c – Support Options allows the user to select a photo or ??? that will be attached to the task in
that event of the profile.