Air-Vac PCBRM100, Руководство пользователя

Страница: 174 / 209

PCBRM100 User’s Guide Chapter 6: Maintenance
4101.00.902 6-18
To access the Flow Adjustment Screen:
1. Log on as “DRS27” or any “high level” security operator and select the Thumbs Up icon.
2. Using right side mouse button, click the Air-Vac logo. You are now in the ‘Hidden’ Setup window.
3. Select Setup from the menu bar.
4. Select Adjustments/Nozzle Flow. The Nozzle Flow Adjustment screen will appear as shown below.
Making Flow Controller Verifications and Adjustments:
5. Click on the 100% radio button (A) on the Flow Adjustment Screen. The airflow will activate after 1-4
seconds.
6. Wait 45 seconds before making any adjustments.
7. Check the 100% scribe line on the flow meter. If the flow meter reads too high or too low, adjust-
ments can be made immediately by dragging or clicking on the track bar within the Nozzle Flow Con-
troller group box (B). The airflow should not be interrupted. The adjustments will be automatically ap-
plied and stable within 3-5 seconds. The track bar is always connected to the active flow rate
helping to minimize incorrect adjustments.
Note:
N
O ADJUSTMENT IS NECESSARY IF THE FLOW IS OFF BY LESS THAN THE THICKNESS OF THE
FLOAT
+/-. R
EAD THE BOTTOM OF FLOAT HEAD
(
LARGEST DIAMETER
).
(B)
(A)