Air-Vac PCBRM100, Руководство пользователя

Страница: 112 / 209

PCBRM100 User’s Guide Chapter 4: Software Overview
4101.00.902 4-74
•
Use Force Sensor Stop: If checked, use for force touch in fixed height barrel
cleaning.
•
Velocity (%): Speed of initial force touch of barrel cleaning tip.
•
Place Target (gram): Initial force touch target (grams)
•
Safety Target (gram): Maximum force target during barrel cleaning process. If ex-
ceeded, process will STOP!
•
Object Dimensions
•
Use Default Object Size
•
If unchecked: Do not use object dimensions for barrel cleaning
•
Size (X) (mm): Define barrel cleaning area.
•
Size (Y) (mm): Example: DIMM X:11, Y:130mm
•
Nozzle Size X (mm): Barrel clean tip is 5.0mm
•
Nozzle Size Y (mm): Use 4.0 to provide 1.0mm overlap
•
If checked: Uses component dimensions for barrel cleaning pattern
•
Nozzle Size X (mm): Barrel clean tip is 5.0mm
•
Nozzle Size Y (mm): Use 4.0 to provide 1.0mm overlap
•
Pattern Motion
•
Use Pattern Motion
•
If unchecked: Manual barrel cleaning
•
If checked: Automatic barrel cleaning
•
Velocity (%): X/Y speed of tip (5 – 7% typical)
•
Pattern (dropdown menu: S-Pattern, Single-Line): Snake or line
•
Direction (dropdown menu: Row, Column): Row or column
•
Start Delay (sec): Heating time prior to start (20 seconds recommended)
•
End Delay (sec): 0 recommended