Air Techniques Accent B5100B, Инструкция по эксплуатации

Страница: 14 / 32

14
I N D I C A T O R S A N D C O N N E C T O R S
Front Panel. The specific functions of the LED indicators and connector
(see Figure 3) located on the front panel of the Control Module are
described below.
Green LED indicator Illuminates green upon power turn on
then flashes briefly to indicate that the
system is operating.
Yellow LED indicator Blinks yellow to indicate that system is
ready for image acquisition.
Illuminates steady yellow to indicate that
the
A C C E N T system has an image.
Extinguishes during image transfer.
Blue LED indicator Illuminates solid blue to indicate that the
A C C E N T system is linked to the computer.
Blinks blue during image transfer.
Sensor Connector Socket Accepts connection of either Size 1 or 2
A C C E N T Sensor.
Figure 3. Bluetooth A C C E N T Control Module Front View
BLUE
YELLOW
GREEN
20-PIN SENSOR
CONNECTOR
SOCKET
Power Turn-ON: Depress the Power Button
for approximately 1.5 seconds.
Power Turn-OFF: Depress the Power Button for
approximately 5 seconds to turn off Control
Module. Observe that Green and Yellow
LEDs illuminate then extinguish.
Power Button. As shown by Figure 2, the Power Button located on the
top panel of the Control Module, controls operating power as follows.
POWER
BUTTON
Figure 2. Bluetooth A C C E N T Control Module Top View
Rear Panel. As shown by Figure 4, the
rear panel of the Control Module has a
center pin connector. This connector
accepts the connection of DC power
connector end from the optional battery
charger AC mains line cord, (P/N B5080).
Figure 4. Bluetooth
A C C E N T Control Module
Rear View