Air Techniques Accent B5100B, Инструкция по эксплуатации

Страница: 25 / 32

O P E R A T I O N A L O P T I O N S
25
Alternating between Bluetooth Control Modules.
When using more than one Bluetooth Control Module with a single com-
puter, break the wireless link to the first Control Module and then estab-
lish a wireless link to the second Control Module.
Note: The Initial Setup procedure described above must be completed
with each of the Control Modules prior to use.
1. Break the wireless link to
the first Control Module
by pressing the
U US SB B
S Syysstte em m button on the
A Acccce en ntt:: T TW WA AIIN N D Da atta a
sso ou urrcce e window.
2. Press and hold the power
button on the first
Bluetooth Control
Module until the lights on
the front turn off.
3. Turn on the second
Bluetooth Control
Module.
4. Press the
W Wiirre elle essss ssyysstte em m
button. The Accent TWAIN
interface then starts search-
ing for a new Bluetooth
control module. While it
searches, the bar under the
W Wiirre elle essss ssyysstte em m button
shows the search progress in
yellow.
If the computer has also been
Setup with the second Bluetooth
Control Module, it should only
take a few seconds to establish
the link.
When the link has been established, the progress bar shows the state of
the Bluetooth Control Module batteries and the sensor should be armed.
The blue light on the front of the second Bluetooth Control module will
be illuminated and the yellow light will flash.