Air Products Gasguard 250, Руководство по установке

Страница: 40 / 68

Gasguard
®
250 VMB System Installation Manual
Air Products and Chemicals, Inc. Page 4 - 10
4.5.2 Gasguard 250 Controller Connections
If the optional network communications card is installed, electrical connections to
the Air Products Gasguard network will be made at the master control processor
board (T6) on the inside of the controller door. See Figures 4.7 and 4.9 for details.
Figure 4.7 View of Inside Door of Gasguard 250 Controller
4.5.3 PC Network Breakout Box
This box is located with the network host computer and contains eight 9 pin plugs
for connection of eight 32 device daisy chains. A 32 pin ribbon cable connects this
box to the network host computer. See Figure 4.8 for details of the pin
connections on the Breakout Box.
insert door6.tif