Air Products Gasguard 250, Руководство по установке

Страница: 19 / 68

Gasguard
®
250 VMB System Installation Manual
Air Products and Chemicals, Inc. Page 2 - 4
2.2 Mounting Hole Locations
The Gasguard 250 Valve Manifold Box rack assembly is mounted to the floor
using the four (4) 3/8" holes located in each corner of the rack. See Figure 2.3 for
typical mounting hole locations for the 4 and 8 branch VMB racks. The mounting
location should be clean and level.
Figure 2.3: Mounting Hole Locations for Valve Manifold Box Racks
2.3 Open Controller Dimensional Requirements
The dimensions of the GG250 VMB controller, when opened, are detailed in
Figure 2.4 below.
Figure 2.4: Dimensions of Open Controller (side view)