9
PART NAMES
USING THE SYSTEM
APPENDIX
SETTING AND ADJUSTMENT
Setting the current date and time
[GENERAL] - [DATE/TIME]
When this station is powered up for the
fi
rst time or after this
station is rebooted, set the current date and time.
If screen is off, press the [HOME] button, or touch
1
screen to turn it on.
When the message, "SET CURRENT DATE AND
2
TIME." is displayed, touch SETTING .
Set the month, date, year, hour, and minute
3
individually by touching
or
.
Touch and hold
*
or
to increase speed.
When the setting has
fi
nished, touch
4
ENTER .
Press the [HOME] button to display the HOME
5
window.
To correct date and time
You can correct the current date and time any time by following
the procedue below.
From HOME window, touch
1
SETTINGS
→
GENERAL
→
DATE/TIME .
Set the month, date, year, hour and minute
2
individually by touching
or
.
When the setting has
fi
nished, touch
3
ENTER .
NOTES:
A maximum of 60 seconds time gain/loss can occur in the
•
displayed time over a month. It is recommended to correct the
time periodically.
If there is no power supply for 30 minutes or more, the date and
•
time return to default.
Changing the display language
[GENERAL] - [LANGUAGE]
The display language for the screen is set to English as default.
First change it to the language you need as follows.
This setting is also applied to all sub master stations in this
*
system.
From HOME window,
1
touch SETTINGS
→
GENERAL
→
LANGUAGE .
Touch desired language until highlighted and select
2
ENTER .
If the target language is not found in the window, touch
*
or
.
INITIAL SET-UP
Month Date Year Hour Minute
or
