25
PART NAMES
USING THE SYSTEM
APPENDIX
SETTING AND ADJUSTMENT
RECORDING AND PLAYING IMAGES
Recording
■
Automatic recording
This station automatically records images from door station.
Recording starts approximately 2 seconds after receiving a
*
call.
While recording, “
*
REC” blinks on the screen.
The recorded images are stored in the built-in memory or an
SD (or SDHC) card.
If an SD (or SDHC) card is installed, images will
*
automatically be saved to card.
Recording time and number of recorded images differ
*
depending on the media. (See the table below.)
NOTES:
Automatic recording function cannot be cancelled.
•
The display mode (Zoom/Wide) can be set. (
•
→
P. 20) You can also
switch Zoom and Wide while recording.
The status LED blinks in blue to show there are recorded images
•
that have not been played yet. The LED turns off when
PLAY
is
touched.
Automatic recording does not begin while monitoring a door
•
station. To save images while monitoring, see manual recording
below.
■
Manual recording
You can also record images displayed on the screen.
Touch MENU
→
REC when an image is displayed.
Manual recording is possible only when
*
MENU is displayed
on the screen.
The recording is the same with the automatic recording.
*
However, moving the position of zoom mode and switching
Zoom/Wide cannot be made automatically.
NOTE:
Manual recording cannot be performed during automatic recording.
<Recording time and number of recorded images for a single recording action>
Storage Media
Description
Built-in memory
Up to 6 images are recorded (1 for each second).
* 20 times of recording data can be stored.
SD (or SDHC) card
Up to 40 images are recorded (4 for each second).
Calls in.
Calls in.
1st
2nd
3rd
4th
5th
6th
2 sec.
2 sec.
1 sec.
1 sec.
10 seconds (up to 40 images)
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
1 sec.
Blinks
