13
PART NAMES
USING THE SYSTEM
APPENDIX
SETTING AND ADJUSTMENT
Monitor settings [MONITOR]
You can make the following settings for monitoring.
■
Settings for indoor monitoring
[ROOM MONITOR]
When set to “ENABLE”, this station can be monitored by a sub
master station. When set to “DISABLE”, this station cannot be
monitored by other stations.
From HOME window, touch
1
SETTINGS
→
MONITOR .
Touch
2
ROOM MONITOR and select “ENABLE” or
“DISABLE”.
When the setting has
fi
nished, touch
3
ENTER .
■
Night illumination when monitoring door
stations [VIDEO DOOR LED]
When set to "ENABLE", the white light LED of door station
lights up automatically in low light conditions during monitoring.
The white LED turns off when monitoring ends.
From HOME window, touch
1
SETTINGS
→
MONITOR .
Touch
2
VIDEO DOOR LED and select “ENABLE” or
“DISABLE”.
When the setting has
fi
nished, touch
3
ENTER .
■
Setting the duration time of entrance
monitoring [DOOR MONITOR DURATION]
You can set the entrance monitoring time.
This setting is also applied to all sub master stations in this
*
system.
Setting range:
30, 60, 120 seconds or CONTINUOUS (no time restriction)
From HOME window, touch
1
SETTINGS
→
MONITOR
→
DOOR MONITOR DURATION .
Touch
2
DOOR MONITOR DURATION until the
desired monitoring time is displayed.
When the setting has
fi
nished, touch
3
ENTER .
CAUTION:
When set to "CONTINUOUS", the backlight LED of the screen
may degrade faster, potentially shortening the lifespan of this
station.
■
Setting the duration time of indoor monitoring
[ROOM MONITOR DURATION]
You can set the indoor monitoring time.
This setting is also applied to all sub master stations in this
*
system.
From HOME window, touch
1
SETTINGS
→
MONITOR
→
ROOM MONITOR DURATION .
Touch
2
ROOM MONITOR DURATION and select
"10 min." or "CONTINUOUS" (endless).
When the setting has
fi
nished, touch
3
ENTER .
Enabling/Disabling the operation sound
[GENERAL] - [SOUND SETTING] -
[AUDIBLE TOUCH TONE]
You can make this station sound a beep whenever the
touchscreen is touched.
From HOME window, touch
1
SETTINGS
→
GENERAL
→
SOUND SETTING .
Touch
2
AUDIBLE TOUCH TONE and select
“ENABLE” or “DISABLE”.
Touch
3
ENTER to save change.
Enabling/Disabling voice guidance on a
door station
[GENERAL] - [SOUND SETTING] -
[VOICE GUIDANCE (JM-DVF-L ONLY)]
You can enable or disable voice guidance on JM-DVF-L, a
video door station (guidance-enabled type).
This setting is available for JM-DVF-L only. The other models
*
do not have a voice guidance function.
From HOME window, touch
1
SETTINGS
→
GENERAL
→
SOUND SETTING
→
VOICE GUIDANCE (JM-DVF-L ONLY) .
Touch
2
DOOR1 - DOOR4 that corresponds to JM-
DVF-L, and select “ENABLE” or “DISABLE”.
Touch
3
ENTER to save change.
