Aiphone JM-4MED, Руководство по эксплуатации

Страница: 19 / 32

19
PART NAMES
USING THE SYSTEM
APPENDIX
SETTING AND ADJUSTMENT
■ Receiving a call while talking with another
door station
The call tone sounds in a lower volume.
*
The video image on the screen will continue to display
*
current call.
Video images from the new calling station will not be
*
recorded.
To answer the second call
Conclude current talking to answer new call-in.
If this station is not set to receive a speci fi c door station, this
*
station will not be able to answer the door station calling in to
this system. (To add door, see page 11.)
■ Receiving a call while talking with a sub
master station
The call tone sounds in a lower volume.
*
The video image from the door station is displayed on the
*
screen. The video image is recorded automatically.
The call will stop and video image will disappear when the
*
preset call duration time elapses, then the normal talking
mode is restored.
To answer the call
Conclude talking with sub master station to answer door
station.
Automatic recording will not begin again.
*
If this station is not set to receive a speci fi c door station, this
*
station will not be able to answer the door station calling in to
this system. (To add door, see page 11.)
Answering a call from a sub master
station
When receiving a call from a sub master station, a call tone
sounds and talking becomes enabled automatically.
Communication ends automatically after approx. 10 minutes.
*
The ID number of the calling station will not be displayed.
*
If a sub master station is calling all the stations
*
simultaneously, touching TALK or lifting handset begins
communication and ends call to all other stations.
Speaker volume can be adjusted during communication.
*
( → P. 21)
To complete communication
Touch END or press the [HOME] button.
■ When PRIVACY MODE is set to “ENABLE”
A calling sub master station will not hear sound or a response
from the master station until the call is answered by the master
station.
To respond to a sub master station call, touch TALK or lift
handset.
* Refer to page 12 for setting the PRIVACY MODE.
Adjusting the display mode for viewing
images at a video door station
You can adjust the display mode for viewing images at a video
door station by using the following functions.
■
Switching Zoom/Wide
Touch to zoom in. Touch
to zoom out.
NOTES:
Image will zoom to the preset position. Preset position can be •
adjusted. (
→
P. 20)
Depending on the properties of the video door station camera, the
•
wide image may appear more distorted than the zoom image. This
is not a malfunction.
In zoom mode, the image can be moved from right to left or up
•
and down. (
→
P. 20)
Wide
Zoom