AiP ABA-001IR, Руководство пользователя, Страница: 54 / 79

SWIR Area Camera Series User’s Manual
(OM170000021A)
- 54 -
8.10. DigitalIOControl
In the DigitalIOControl, the settings of the input, GPI and output, GPO(0) and GPO(1) are possible.
In the DigitalIOControl, the name for input and output are called as the followings.
GPI
：
Line0
GPO[0]
：
Line1
GPO[1]
：
Line2
In order to access to each line and CC, the LineSelctor should be set according the following commands.
command param1 Setting
CL line-selector
0 Line0
1 Line1
2 Line2
12 CC1
13 CC2
14 CC3
15 CC4
GV LineSelector
Line0
Line1
Line2
8.10.1. Line0(CC1,2,3,4)
Line0 is connected GPIO circuits and the signal for input only.
Refer chapter 6.3.1
In the CameraLink interface, CC1 to CC4 are used for the input signal.
In order to recognize the current signal level, execute the following command.
command param1 Value
CL line-status
0 Negate
1 Assert
GV LineStatus
false Negate
true Assert
If the level of the signal needs to be reversed, execute the following command.
command param1 Setting
CL line-inverter
0 Non inverted
1 Inverted
GV LineInverter
false Non inverted
true Inverted