AiP ABA-001IR, Руководство пользователя, Страница: 43 / 79

SWIR Area Camera Series User’s Manual
(OM170000021A)
- 43 -
8.7.
AcquisitionControl
AcquisitionControl is the function to synchronize GPI/GPO signal with the exposure. The camera trigger
control and GPIO can be configured with flexibility.
Note
If the following parameters are changed, it is necessary to execute the command in the condition of
AcquisitionControl being stopped. Refer to the follwing descriptions about how to stop AcquisitionStop.
8.7.1.
AcquisitionStart
This command starts the acquisition and output the image according to the trigger setting.
command param1
CL acquisitionstart
start
None
GV AcquisitionStart None
8.7.2. AcquisitionStop
This commadn stops the acquisition. If the commad is executed during the image output, the acquisition
stops after the output is completed. If the camera is waiting the trigger, the acquisition is forced to stop.
command param1
CL acquisitionstop
stop
None
GV AcquisitionStop None
8.7.3. AcquisitionMode
AcquisitionMode has three capturing modes. In case of SingleFrame and MultiFrame, the capturing is
automatically stopped.
command param1 Setting
CL acquisitionmode
mode
0 Only 1frame image is transferred
1 Specific number of frame are transferred
2 Images are continuously transferred
GV AcquisitionMode
SingleFrame Only 1frame image is transferred
MultiFrame Specific number of frame are transferred
Continuous Images are continuously transferred
8.7.4. AcquisitionFrameCount
If MultiFrame is selected in the AcquisitionMode, the following command can set the number of the frame
to be captured.
command param1
CL
acquisitionframecount
framecount
1
～
4,294,967,295
GV AcquisitionFrameCount 1
～
4,294,967,295
8.7.5. Acquisition Reset
All functionalities in the AcquisitionControl are reset to the factory default settings.
command param1
CL acquisition-reset
acreset
―
GV AcquisitionPreset Default