AiP ABA-001IR, Руководство пользователя, Страница: 20 / 79

SWIR Area Camera Series User’s Manual
(OM170000021A)
- 20 -
④ DIP switch
⑤⑥
Power/Status LED
Indicate the camera operating conditions.
Power LED : Power ON(Orange)
、
Power OFF(Extinction)
、
Power ON but no RJ45 connection (Flashing RED),
waiting the trigger (Flashing ORANGE)
Status LED : Waiting command(Flashing ORANGE)
、
Image capturing (Flashing GREEN)
、
System Error (Flashing RED)
Ethernet Status Transition
Bit Name Description
1 DeviceFactoryReset
Initialize the camera settings to the Factory default
After the power is ON, this switch should be OFF
2 DeviceNetworkReset Initialize the network settings to the Factory default
After the power is ON, this switch should be OFF
3
GPO[0]
+5V Pull Up
ON
：
Enable
OFF
：
Disable
4
GPO[1]
+5V Pull Up
ON
：
Enable
OFF
：
Disable
1 2 3 4
O
N
Acquisition Error
No power
System
booting
Received command
System error
Connection
detection in
progress
Wait Trigger …
Device / Host
Connected
Streaming data
being transferred
AcquisitionStart
Transfer is done
Disconnect
AcquisitionStop
Discovery
STATUS
POWER
POWER STATUS
STATUS POWER
Signal
Detection
…
Recovery
Found Error
STATUS POWER
Command
Ack
Command
Completion
Initiate
Camera
…
Signaled
Trigger
AcquisitionStart
Found Error
Invalid
Trigger
…
Wait
Host
…
Extinction
GREEN Lighting
GREEN High-speed Flashing
GREEN Flashing
RED Lighting
RED High-speed Flashing
RED Flashing
ORANGE Lighting
ORANGE High-speed Lighting
ORANGE Flashing
No change
Diagnostic mode
FFC,DPC,LUT,User
Set in progress
Completion
Command