Aimco iEC, Руководство пользователя

Страница: 15 / 48

15
Using the Optional Keypad Display Module (KDM)
Depending on the number of Parameter Sets that have previously been programmed into the iEC Controller, the
user will have the option of choosing from 1 to 8 parameter sets to edit. If the user chooses to configure a new
parameter, the next set will be assigned the next available PSet value, up to 8.
Press the button on the KDM corresponding to the PSET that will be edited or configured.
The following text will be displayed on the KDM display screen:
If editing a parameter set, the Control Strategy (definitions on page 11) of the PSET will be identified by
an asterisk.
Press the button on the KDM corresponding to the desired Control Strategy.
The following text will briefly be displayed on the KDM display screen:
followed by the following text:
The
PS#
text in the bottom - right cor- ner of the display is for the users reference
and identifies the PSET that is being configured or edited.
Entering / Editing Values in the KDM
The flashing cursor highlights which field can be changed. Two possibilities exist for entering values into a field,
depending on which function is being programmed:
For numeric values, press the appropriate key on the KDM.
For
YES
or
NO
entries, press
When an
<
and/or
>
symbol ap- pears in the upper -
right corner of the KDM display, this notifies the user that additional functions may be accessed by scrolling to
the previous or next page of text. To scroll to one of
these pages, press
!
+ or +
YES
NO
+
4
or +
6