Aimco iEC, Руководство пользователя

Страница: 16 / 48

16
Using the Optional Keypad Display Module (KDM)
To move to and modify the next or previous function, press
The cursor will then highlight the field that can be modified.
To clear a mistakenly entered value, press
When all functions have been modified appropriately, press
Verify that the correct parameter set is active by observing the PSET Indicator on the Main Display Panel. If the
desired parameter set is not active, press CHANGE PSET to cycle through the available parameter sets until
the appropriate set is displayed.
The tool is now ready to be run to the appropriate target torque value.
The AUTO - SET function is under development for future versions of the iEC controller.
If the user exits the CONFIGURE mode before pressing all edits and modifications that have been
entered will be lost and the entries will revert back to the previous value.
Main Menu: 2) Calibration
The Auto Cal is non functional for the user.
+
2
or +
8
!
!
+
DEL