Aichi SV06CNL, Руководство по эксплуатации с информацией по обслуживанию

Страница: 16 / 40

Chapter 3 - Safety System
10
Chapter 3
Safety Systems
Emergency Stop Device 11
The machine is equipped with readily
identifiable emergency stop buttons, located
at both the upper and lower control panels.
It stops all of the movements of the machine
when this button is pressed.
Emergency Lowering 21
This is an emergency lowering device for
when the platform has been raised, and
cannot be lowered because of problems with
the power source.
The emergency lowering handle (fig. 3–1, A) is
located at the front of the machine.
The handle is connected, by a cable, to the
holding valve on the lift cylinder.
Pulling the handle opens the valve spool,
lowering the platform.
A
M07X1301
fi g. 3f1
Pothole Protector 31
When the platform has been raised, the
pothole protectors come down automatically.
It provides pothole protection for traveling
raised platform.
Pothole Protector Interlock 41
If the pothole protectors are unable to lock in
position because an object is caught under it,
the machine will not travel and the platform
will not be raised.
Guardrail 51
There are guardrails on all sides of the platform
to prevent persons in the platform from falling
off the platform.
The entry gate is part of the guardrail system
and must be securely fastened after entering
the platform.
Safety Prop 61
The safety prop is a support pole that prevents
the scissors arm from lowering when it is
necessary to do maintenance work under the
scissors arm or platform.
(Stowage Position)
Safety Prop
M0824121
fi g. 3ff
How to Use the Safety Prop
(1) Remove all materials from the platform.
(2) Raise the platform about 2.5 m (SV06CNL)
/ 3 m (SV08CNL) from the ground.
(3) Rotate the safety prop and hang it down
below.
WARNING
Keep a safe distance from scissors arm
when lowering the platform.
(4) Lower the platform carefully until the
safety prop rests safety on the scissors
arm.
(5) Stow the safety prop in its stowage
position when it is not used.