Aichi SV06CNL, Руководство по эксплуатации с информацией по обслуживанию

Страница: 29 / 40

Chapter 8 - Operation
f3
(2) Hold the switch more than 0.3 second and
then release it, the power indicator light
goes on and the alarm buzzer sounds.
(3) Operate the lift/travel joystick controller
to “FORWARD” or “BACKWARD” within 3
seconds after releasing the lift/travel select
switch.
NOTICE
If the power indicator light goes off or
blinks, release all function switches and
then operate again from (1).
Steering with Steering Switch 223
(1) Select the lift/travel select switch to
"TRAVEL."
(2) Hold the switch more than 0.3 second and
then release it, the power indicator light
goes on and the alarm buzzer sounds.
(3) Operate the steering switch to “RIGHT”
or “LEFT” within 3 seconds after releasing
the lift/travel select switch. Then steering
wheels should turn right or left. This
operation is possible even when traveling.
NOTICE
If the power indicator light goes off or
blinks, release all function switches and
then operate again from (1).
(4) Even when the steering switch is returned
to neutral, steering will not return to
neutral.
Steering with Steering Dial 224
(option)
(1) Select the lift/travel select switch to
"TRAVEL."
(2) Hold the switch more than 0.3 second and
then release it, the power indicator light
goes on and the alarm buzzer sounds.
(3) Turn the steering dial to “RIGHT” or “LEFT”
within 3 seconds after releasing the lift/
travel select switch. Then steering wheels
should turn right or left. This operation is
possible even when traveling.
NOTICE
If the power indicator light goes off or
blinks, release all function switches and
then operate again from (1).
Raising and Lowering Platform 221
Lift / Travel
Select Switch
Power Indicator
Light
Steering
Switch
Lift / Travel
Joystick
M07X9620
fi g. ff3
(1) Select the lift/travel select switch to "LIFT."
(2) Hold the lift/travel select switch more than
0.3 second and then release it, the power
indicator light goes on and the alarm
buzzer sounds.
(3) Operate the lift/travel joystick controller to
“RAISE” or “LOWER” within 3 seconds after
releasing the lift/travel select switch.
NOTICE
If the power indicator light goes off or
blinks, release all function switches and
then operate again from (1).
(4) Immediately reduce the load if the
overload warning light turned on when
raising the platform.
NOTICE
The lowering of the platform will stop
when the platform is 1.f m (SV0fCNL)
/ 1.f m (SV0fCNL) above the ground.
To lower the platform fully, check that
there are no people and/or objects
under the platform, release the joystick
controller once, wait f seconds and
then operate again to lower the
platform fully.
Traveling 222
(1) Select the lift/travel select switch to
"TRAVEL."