Chapter 1 - Safety Rules
f
Damaged Machine Hazards
61
WARNING
• Do not use a damaged or
malfunctioning machine. Have it
checked and repaired immediately.
• When operators are changed by work
shift, perform the pre-start checks at
every change. Perform the pre-start
checks on the operator's responsibility.
• Perform the pre-start checks on a firm,
level surface, with the platform lowered,
and the extension deck retracted.
• If the pre-start checks reveal any
abnormalities, immediately put an "Out
of Order" sign on the machine, and stop
using the machine.
• Make sure to perform all maintenance
described in this manual and in the
designated service manual for the
machine.
• Be sure all decals are in place and that
no decal has a loss and damage. Any
decal loss or damage is one of the
machine malfunction.
Fire Hazards
71
WARNING
• When handling flammables (fuel, oil,
etc.), be aware of anything that can
cause fire.
• Have a first-aid kit and a fire extinguisher
ready in case of an accident or fire.
• If the machine is to be used in a location
where flammable gas is produced,
only use the machine after sufficient
ventilation.
Battery Safety
81
WARNING
• The battery liquid contains corrosive
acid. When dealing with the battery,
always wear appropriate protective
clothing and equipments to protect
your hands, eyes, face and body, and
avoid contacting battery liquid.
• If battery liquid gets on the skin or on
clothing, wash it away immediately with
cold water. If it gets into the eye, wash
immediately with cold water, and seek
ophthalmologic treatment immediately.
• The battery produces flammable
hydrogen gas, and there is a possibility
of explosion. Never allow anything
that can cause fire close to the battery.
Charge the battery only under good
ventilation.
• The battery also acts as a counterweight,
so it is essential for the stability of the
machine. If the battery is changed, use
one designated by AICHI.
Personal Safety
91
• When working, wear appropriate
protective clothing and equipments.
All persons in the platform must
comply with employer, work area, and
local and national safety regulations
regarding the use of a personal
protective equipment. All personal
protective equipments must comply
with applicable regulations, and must
be inspected and used in accordance
with their manufacturer's instructions.
• All personal fall protective equipments
must be attached to only
the authorized lanyard
anchorage points provided
in the platform.
Содержание SV06CNL
Страница 6: ...iv This page intentionally left blank...
Страница 38: ...Chapter 12 Specifications 32 This page intentionally left blank...
Страница 39: ......
Страница 40: ......