en-US | AHT Cooling Systems GmbH
Setup and installation | 7
370607_2_0718
51 / 64
NOTICE
Material damage due to deformation of the display shelves.
▪ Allign brackets parallel.
▪ Shelf displays must be aligned horizontally.
Number and position of the display shelves:
– See sticker „loading specification“ inside on the unit (side or top).
– See →Loading: Sketch loading specification.
Unit models with different display shelves:
Lowest display shelf must be at the lowest position. Possible insertion positions for the lowest dis-
play shelf: openings 1 to 7
Install the LED-bars before installing the display shelves (see →Mounting LED-bars)
– The bracket for the display shelves must hang up in the openings of the mounting rail.
openings
mounting rail
bracket
bracket with connection
cable LED-bar
Fig. 9:
Hang up bracket (without/with LED-bar)
– Hang display shelves in the brackets.
NOTICE
Material damage due to damage to the cables.
▪ Do not lay the cables over the bracket.
▪ Cables must be inside the bracket.
connection cable and
combination cable
LED
Öffnung Haltewinkel
Fig. 10:
Hook in display shelves
7.1 Electrical connection
The connection to the power supply is provided by the operator.
For technical data see →Technical data
WARNING
Connect the unit to the power supply.
Contact with live parts may cause electric shock. Risk of fire due to sparks or overloading.
▪ Work on the electrical system may only be performed by qualified staff.
▪ Before connecting to power supply, note the following:
- Applicable local electrical safety regulations.
- Applicable standards and safety notices.
