7 | Setup and installation
AHT Cooling Systems GmbH | en-US
50 / 64
370607_2_0718
click
Spring
Stop
Fig. 5:
Clip mechanism for LED-bar
Pull the connection cable for the LED bars out of the rear of the unit and insert the brackets through
the cable duct.
Connection
cable for LED-
bars
Cable duct
bracket
Fig. 6:
Run through connection cable
Connect the connection cable to the combination cable of the LED bar.
Fig. 7:
Connect cable to LED-bar
LED-bar is connected to power supply.
Push connected cables back into the cable duct with a slight upward movement.
Lay the connection cable as far as possible in the back of the unit.
Fig. 8:
Lay cable of LED-bar
Installation of display shelfs
Responsibility: Operator
CAUTION
Improper assembly of the display shelves.
Danger of injury due to falling of display shelves loaded with goods.
▪ The bracket for the display shelves and the display shelves must fully engage in the slots pro-
vided during suspension.
