AHB marvel 8 mark III Series, Руководство пользователя

Страница: 70 / 70

MARVEL 8 MARK III PARTS
I-1
© MARVEL MFG. CO., INC. MANUAL 8SDN10871N (04/08)
When ordering repair parts always provide the
following information:
*
Machine model number (8MARK III)
*
Machine Serial number.
NOTE: The serial number is stamped on the
machine's data plate (see Serial Number
reference photo in the Components section).
*
Machine voltage (stamped on the machine's
data plate)
*
Part number (not key number)
*
Part Description
*
Quantity required
This information is important to speed the
processing of your order and to avoid the cost
and inconvenience of shipping the wrong part.
To order parts or request service, contact:
Marvel Manufacturing Co. Inc.
3501 Marvel Drive
Oshkosh, WI 54902
Phone (800) 472-9464
Fax (920) 236-7209
IMPORTANT
Never operate the machine unless all parts are
installed and all guards and covers are closed
and functioning properly.
Avoid serious injury. Never
operate the saw unless all
guards and covers supplied
with the machine are installed
and functioning as designed.
HARDWARE AND FITTINGS
Important: This saw has been assembled
using both standard and metric hardware.
It is beyond the scope of this parts section to
identify every common piece of hardware or
hydraulic and electrical fitting. In most cases
parts which are not identified will never need
replacement. If you do require a part that is not
identified in this manual, our parts and service
department will gladly assist you in identifying
and obtaining the part you need.
ELECTRICAL AND PNEUMATIC
COMPONENTS
When your saw requires replacement electrical
or pneumatic components, please refer to the
electrical and/or pneumatic schematics supplied
with your machine. These schematics will
contain part numbers that may be specific to
your particular machine.
WARNING