AHB marvel 8 mark III Series, Руководство пользователя

Страница: 26 / 70

MARVEL 8 MARK III COMPONENTS
C-2
© MARVEL MFG. CO., INC. MANUAL 8SDN10871N (04/08)
IMPORTANT: This section is not intended
to describe the operation of the saw, but
rather the function and operation of
individual components.
This section describes the function of each
machine control and component to help the
operator become familiar with the machine.
NOTE: This section describes the standard
machines as well as the most common options.
Options not included in this manual may be
described by separate bulletins.
Four eyebolts are installed in the saw table for
lifting the machine. These eyebolts must be
removed from the table before operating the
saw.
Feed Force Gauge and Feed Force Adjustment
Regulator
SERIAL NUMBER
The machine's serial number is stamped on the
rear of the right side of the saw table. The serial
number is very important when requesting
service or ordering repair parts.
NOTE: Machine serial number is also on the
machine's data plate.
The serial number is stamped in the area
enclosed by the box in this photo.
(4) Lift Eyes – Remove
before Operating Saw
Feed Force Adjustment Regulator
Feed Force Gauge
Serial Number Location