AHB marvel 8 mark III Series, Руководство пользователя

Страница: 13 / 70

SAFETY
S-7
OPERATE THE MACHINE SAFELY
•
Use the machine only for its intended use – metal
cutting within its specified capacity.
•
Do not operate the machine if it has been altered in
any way, is defective, or has worn, missing, or
broken parts.
•
Operate the machine in a careful and deliberate
manner.
•
Remove rings, watches, bracelets, necklaces and
other jewelry. These can get caught in the machine
and cause serious injury or death.
•
Refer to the machine's data charts and operating
instructions for the proper blade type, feed rate,
blade speed, and feed pressure for the material you
are cutting.
•
Stop the machine before reaching into the cutting
area or any area with moving parts.
•
Position the blade guards as close to the stock as
possible.
•
Clamp the stock securely.
•
Report unsafe conditions to your employer.
•
Never feed material into the blade by hand unless
the machine is specifically designed for manual
stock feed.
•
Always use appropriate pushing devises when
feeding stock by hand or removing remnants from
the cutting area.