AHB marvel 8 mark III Series, Руководство пользователя

Страница: 42 / 70

MARVEL 8 MARK III OPERATION
F-4
© MARVEL MFG. CO., INC. MANUAL 8SDN10871N (04/08)
A. Unclamp the work stock from the vices,
reposition the work stock for the next cut
and clamp work stock in vices.
B. Press the “START BLADE” pushbutton
to start the saw blade.
C. Repeat steps 10 through 15 until all cuts
have been completed.
16. When all cuts have been completed:
A.
Turn the COOLANT switch to the OFF
position.
B. Press the STOP pushbutton to de-
energize the saw.
C. Turn the main electrical disconnect
switch to OFF and lock it in position.
D. Actuate the compressed air LOCKOUT
VALVE and lock it in position.
SETTING SAW BLADE TO A 3º
FORWARD CANT
The Series 8, Mark III saw has a new feature
that allows the operator to set the saw blade to a
3º forward cant. This feature is helpful in
starting cuts more efficiently in thicker
materials.
Set the saw blade to a 3º forward cant as
follows:
The door safety interlocks DO
NOT disconnect the saw from
the main power supply. Avoid
serious injury or death by
turning the main electrical
disconnect switch to the "Off"
position before adjusting,
servicing or cleaning the saw.
Avoid Serious Injury. Wear
Protective work gloves and
safety face shield when
adjusting blades.
Avoid serious injury. Keep
away from the drive and avoid
direct contact with accessories
during use of the air ratchet.
Loose clothing, jewelry, and
hair can be caught in the
ratchet and cause choking,
scalping, or other serious
injury.
Always wear impact-resistant
eye protection when involved
with the operation, repair, or
maintenance of the air ratchet
or when changing accessories
on the tool. Ensure that all
other in the area are also
wearing eye protection. Even
small projectiles can injure
eyes and cause blindness.
Use only proper accessories
designed for use with
pneumatic screwdrivers, nut-
runners, ratchets, and pulse
tools.
Unexpected blade movement
may occur and should be
anticipated at any time after
the blade tension has been
reduced. The blade may drop
off of the upper band wheel or
disengage from the lower band
wheel and spring into a coiled
shape.
1.
Position the saw in the full back position.
2. Disconnect electrical power using the main
disconnect on the front of the main control
panel.
3. Open the upper band wheel doors carefully.
4. Operate the Blade Tension Air Ratchet to
reduce the tension on the blade enough to
remove the blade from the upper band
wheel.
WARNING
WARNING
WARNING
WARNING
CAUTION
CAUTION