
Mobile Stumpfschweißmaschine
Typ
agru SP 63-mobile
Geräte-Nr. 06310281
Netz
230V 50Hz 1700W IP54
Gewicht
ca. 45 kg Baujahr: 2014
Lizenzhersteller
HÜRNER Schweißtechnik GmbH
Nieder-Ohmener Str. 26
D - 32325 Mücke
Typ
agru SP 63-mobile
Exklusives Produkt der Fa.
agru Kunststofftechnik GmbH
Ing.-Pesendorfer-Str.
31
A - 4540 Bad Hall
Tel. +43 7258 7900
Fax +43 7528 3863
Version October 2014
8
EN
agru SP 63-mobile User’s Manual
if applicable, secured with the transport lock during transport
at all times (see explanations and figures in Sect. 4.1).
The transport box should also be used to store the machine. The machine
has to be stored in a dry location, be clean or has to be cleaned, and be
locked against unwanted operation.
2.8
Identifying the Machine
Each machine is identified by a name plate. It shows the machine
model (“Typ”), its year of manufacture (“Baujahr”), the serial number
(“Geräte-Nr.”), the rated power (“Netz”), and the manufacturer (“Lizenz-
hersteller”).
3
Product Description and Principles of Operation
3.1 Intended
Use
The agru SP 63-mobile Welding Machine is designed exclusively for
welding thermoplastic pipes and fittings using the butt-welding process
with plasticization by infrared beams.
Only the welding parameters shown on the screen display (prepro-
grammed by the manufacturer or defined by the user) can be selected
for a welding operation. If a modification of preinstalled parameters os
needed exeptionally, contact agru Kunststofftechnik.
It is also part of the intended use to conform to the instructions provided
in the User’s Manual.
Important
The manufacturer can in no circumstances be held liable for
damage or consequential damage that occurs as a result of the
non-compliance with the procedures described in the User’s
Manual, the modification of the manufacturer-programmed
welding parameters, or non-intended use. Any such deviation
or modification will void any and all warranties under which the
product may be.
3.2 Machine
Description
The machine can be used as an in-shop installation, and with anodized
aluminum and stainless steel components, it is also suited for clean
room applications. The machine enables users to enter the data that are
relevant for the welding process and for the traceability of the welded
joint. From the entered welding parameters, it calculates automatically
the applicable forces, times, and temperatures and controls the semi-
automatic welding process.
All welding and traceability data are entered either directly at the ma-
chine, on the keypad of its front panel with display screen, or read from
a transponder card by the transponder reader. The welding process in
monitored in its entirety and saved to a welding report. All welding reports
can the be downloaded to a USB stick as an abstract, an extended report
or as a DataWork database file.
Using the menus displayed on the screen, the machine can be customized
to the application in hand (see section 4.3, Configuring the Machine).
3.2.1 Component
Overview
(see figure on next page)