Version October 2014
EN
25
agru SP 63-mobile User’s Manual
6.2
Data on the Machine and its Control Software
The version of the installed control software and data characterizing the
machine itself are displayed when the “Info” sub-menu was selected in
the configuration menu (see sub-section 4.2) or when the
key was
pressed in the default screen (see Display 3).
Machine service or (re-) set-up may require certain resets/reinitializations
of the machine, which are performed by reading specific transponder
cards with the RFID reader. These cards are handed exclusively to au-
thorized personnel with the operating organization.
6.3
Service and Repair
As the machine is used in applications that are sensitive to safety con-
siderations, it may be serviced and repaired only on our premises or by
partners who were specifically trained and authorized. Thus, constantly
high standards of operation quality and safety are maintained.
Important
Non-compliance with this provision will dispense the manufac-
turer from any warranty and liability claims for the unit and any
consequential damage.
All machines that are new or newly programmed during maintenance or
upon request are shipped with the most recent software version.
Info
At the date of shipment, the service and maintenance interval
is set to 18 months or 5000 welding operations (different in
some markets), whichever comes first.
7
Service and Repair Contact
Info
We reserve the right to change technical specifications of the
unit without prior notice.
7.1 Manufacturer
Warranty
The warranty assumed by the licensed manufacturer is effective, on
principle, for 1 year or up to 3000 welded joints. Claims for warranty may
only be raised if the default parameters present in memory at delivery
are/were used for welding and if the nominal temperature is/was lower
than or equal to 530°C (990°F).
7.2 Technical
Documentation
Wiring diagrams, computer-assisted designs and further technical lit-
eratures, as complements or more in depth, will be provided by agru
Kunststofftechnik upon request at the address given above.
7.3 Risk
Assessment
A risk assessment under the provisions of the so-called machinery direc-
tive 2006/42/EC was conducted for the machine by a qualified person
entitled to the performance of such an assessment.
A
sahi/America
655 Andover St.
Lawrence, MA 01843
1-800-343-3618
P.O. Box 1108 • 655 Andover St.,Lawrence, MA 01843 • Tel: (800) 343-3618, (781) 321-5409
Fax: 800-787-6861• Website: www.asahi-america.com • Email: [email protected]