Version October 2014
24
EN
agru SP 63-mobile User’s Manual
5.1
Downloading Welding Reports to a USB Stick
When a USB stick is inserted into the interface port while the default
screen (see Display 3) is showing, the machine displays the menu in
which the file type can be selected that is going to be used for download-
ing the reports (Display 21).
After the selection of the file format for download, a similar screen ap-
pears and offers five options of what exactly will be downloaded:
•
all reports in memory (i. e., since the reports were last deleted)
•
the reports that belong to a certain commission or project
•
the reports of operations performed by a certain welder
•
all reports in a certain range of dates
•
all reports in a certain range of reports/report numbers
When an option that does not send all, but only a selection of reports to
the stick was selected, the operator has to define the desired selection/
restriction on the next screen. If a commission number or welder is to be
selected, reading it from a transponder card or a bar code is also possible.
With these two restrictions, he can browse through the reports in system
memory to select the desired commission (see Display 20) or desired
welder, after the browsing screen was accessed by pressing the
,
cursor keys simultaneously; to quit the browsing screen, press STOP/
RESET. Or he enters the start and the end of the desired date range or
report range, of which the reports should be downloaded. Whatever the
selected option, the input screen that appears adapts to the input cur-
rently needed to enter the desired restriction of reports to download. All
inputs have to be confirmed by pressing the START/SET key.
After successful download, the machine displays a message telling the
welder that the process was o.k.
5.2
Showing Reports in Memory, Printing Pipe Label Tags
Using the ViewWeld feature (see section 4.8), it is possible to display
on the screen a certain welding report saved to memory and to print a
label tag of that welding from the ViewWeld screen.
Printing label tags is possible only when the tag printer is connected to the
USB A port of the machine. If this is not the case, an error is displayed.
The printer can still be connected when the error message is showing;
the machine recognizes this, the error disappears from the screen, and
the download starts.
5.3
Deleting Reports from Memory
To delete the reports stored in memory, use the appropriate option in the
configuration menu (see sub-section 4.2). Upon touching this button, a
safety warning asking if you really want to delete them appears on the
screen and has to be confirmed to effectively delete the reports currently
in memory.
6 System
Data
6.1
Setting the Date and the Time of Day
When the “Date/Time” sub-menu was selected in the configuration
menu (see sub-section 4.2), the screen shows what is reproduced in
Display 22.
The time of day and the date can be set using the keypad on the front
panel.
Display 21
* Select File Type *
>DataWork File
PDF Abstract
PDF Ext'd Report
Display 22
** Set Time/Date ***
22.11.14 15:49