OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
103
Fig. 111
Fig. 112
•
Turn the rotating knob for damping the lowering of the rear hydraulic lift mechanism all
the way to block the lowering operation; refer to the chapter “The rear hydraulic lift
mechanism control”:
•
Slowly drive the tractor up the
ramp or the loading ramp and onto
the transport vehicle. The driver
must
be
familiar
with
the
procedure for loading the tractor
onto the transport vehicle to
ensure adequate safety.
•
When you park the tractor on the
transport vehicle, shut down the
engine and apply the parking
brake. Before removing the key,
shift into the lowest gear.
Before transporting, secure the tractor
with safety wedges and use belts to fasten
it. The roll bar on the tractor can be
lowered to save some space during
transport.
IMPORTANT:
Use a loading ramp to load the tractor on a transport vehicle!
WARNING:
The tractor
must not
exceed the maximum permissible dimensions
of the transport means.
Содержание AGT 106
