OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
125
Fig. 145
Fig. 146
7
OPERATION OF THE TRACTOR
Before operating the tractor, the driver must always read the operating and maintenance
instructions, become familiar with the operating controls and perform a test drive with the
tractor.
•
For a proper operation of the tractor, it is important to be familiar with the operation of all
the operating controls.
•
Only operate the tractor when in good mental and physical health and properly instructed
about the work to be carried out.
•
ALWAYS use caution, even if you have operated the tractor before; safety always comes
first, the work can wait.
•
Before operating the tractor, always make sure that the safety devices are properly
installed and functional.
7.1
USING THE SAFETY BELT
To fasten the safety belt. insert the belt
tongue (1) into the buckle (2). The safety
belt is unfastened by pushing the red
button on the buckle and releasing the
belt tongue.
Before starting to work with the tractor,
always adjust the safety belt by adjusting
the strap (3) along your body.
Adjusting the safety belt
•
Fasten the safety belt as described
above.
•
Push the strap of the safety belt into
the buckle to release it and pull it
from the other side to tighten it to the
length that suits you.
•
To extend the strap of the safety belt,
repeat the procedure in reverse order.
WARNING:
When adjusted, the safety belt must not be too loose, otherwise it
will lose its function in the event of a tractor rollover.
Subsequent adjustments are not necessary if the tractor is operated by a single
person. However, the adjustment is NECESSARY if the tractor will be operated
by a different person!
Содержание AGT 106
